close
Choose Your Site
Global
Social Media
 |
| Specifications | |||||||
| Parameter | Value | Units | |||||
| Rated capacity (Emax) | 30 / 50 / 60 / 100 / 150 / 200 / 250 / 300 / 500 | kg | |||||
| Accuracy class | C3 | C3MR | C5 | C6 | |||
| Maximum number of LC intervals (nmax) | 3000 | 2*3000 | 5000 | 6000 | |||
| Min. LC verification interval (vmin) | Emax/5000 | Emax/10000 | g | ||||
| Temp. effect on zero balance | ± 0.0028 | ± 0.0014 | % of Emax/℃ | ||||
| Zero balance | ± 0.1 | mV/V | |||||
| Rated output | 2.0 | mV/V | |||||
| Rated output tolerance | ± 0.2 | mV/V | |||||
| Temp. effect on rated output +20…+40℃ | ± 0.00175 | ± 0.00175 | ± 0.00105 | ± 0.00087 | % of AL/℃ | ||
| -10…+20℃ | ± 0.00117 | ± 0.00117 | ± 0.0007 | ± 0.00058 | |||
| Hysteresis error | ± 0.0175 | ± 0.0175 | ± 0.0105 | ± 0.0105 | % of Emax | ||
| Non-linearity error | ± 0.0175 | ± 0.0175 | ± 0.0105 | ± 0.0105 | % of Emax | ||
| Min. dead load output return | ± 0.0166 | ± 0.0166 | ± 0.0100 | ± 0.0083 | % of AL | ||
| Offer center load error（OIML R76） | ± 0.0044 | ± 0.0044 | ± 0.0026 | ± 0.0022 | % of AL/cm | ||
| Terminal resistance | Excitation | 404 ± 15 | Ω | ||||
| Output | 350 ± 3 | Ω | |||||
| Insulation resistance @50VDC | ＞2000 | MΩ | |||||
| Excitation voltage | Recommended | 10 | V AC/DC | ||||
| Maximum | 15 | V AC/DC | |||||
| Temperature range | Compensated | -10 to +40 | ℃ | ||||
| Operating | -10 to +50 | ℃ | |||||
| Safe storage | -25 to +70 | ℃ | |||||
| Load limit | Safe | 150 | % of Emax | ||||
| Ultimate | 300 | % of Emax | |||||
| Protection | Type | Silicone rubber over gage | |||||
| IP rating | IP65 | ||||||
| OIML / European Approval | OIML Cert. No. | R60-2017-A-NL1-22.22 | |||||
| European Cert. No. | TC11564 | ||||||
| Class | C6 | ||||||
| nmax | 6000 | ||||||
| NTEP Approval | Cert. No. | In application process for parrellel certification | |||||
| Class | |||||||
| nmax | |||||||
| Cable | Length | 1.5 | m | ||||
| Type | 4-wire, PVC | ||||||
| Construction | Aluminum | ||||||
| Maximum platform size | 400 x 500 | mm | |||||
| Recommended torque | 14.0 | N.m | |||||
| Notes: The values for linearity, hysteresis and temp. effect on rated output are recommended values, the sum of these data meets the requirements according to OIML R60. | |||||||
| Specifications | |||||||
| Parameter | Value | Units | |||||
| Rated capacity (Emax) | 30 / 50 / 60 / 100 / 150 / 200 / 250 / 300 / 500 | kg | |||||
| Accuracy class | C3 | C3MR | C5 | C6 | |||
| Maximum number of LC intervals (nmax) | 3000 | 2*3000 | 5000 | 6000 | |||
| Min. LC verification interval (vmin) | Emax/5000 | Emax/10000 | g | ||||
| Temp. effect on zero balance | ± 0.0028 | ± 0.0014 | % of Emax/℃ | ||||
| Zero balance | ± 0.1 | mV/V | |||||
| Rated output | 2.0 | mV/V | |||||
| Rated output tolerance | ± 0.2 | mV/V | |||||
| Temp. effect on rated output +20…+40℃ | ± 0.00175 | ± 0.00175 | ± 0.00105 | ± 0.00087 | % of AL/℃ | ||
| -10…+20℃ | ± 0.00117 | ± 0.00117 | ± 0.0007 | ± 0.00058 | |||
| Hysteresis error | ± 0.0175 | ± 0.0175 | ± 0.0105 | ± 0.0105 | % of Emax | ||
| Non-linearity error | ± 0.0175 | ± 0.0175 | ± 0.0105 | ± 0.0105 | % of Emax | ||
| Min. dead load output return | ± 0.0166 | ± 0.0166 | ± 0.0100 | ± 0.0083 | % of AL | ||
| Offer center load error（OIML R76） | ± 0.0044 | ± 0.0044 | ± 0.0026 | ± 0.0022 | % of AL/cm | ||
| Terminal resistance | Excitation | 404 ± 15 | Ω | ||||
| Output | 350 ± 3 | Ω | |||||
| Insulation resistance @50VDC | ＞2000 | MΩ | |||||
| Excitation voltage | Recommended | 10 | V AC/DC | ||||
| Maximum | 15 | V AC/DC | |||||
| Temperature range | Compensated | -10 to +40 | ℃ | ||||
| Operating | -10 to +50 | ℃ | |||||
| Safe storage | -25 to +70 | ℃ | |||||
| Load limit | Safe | 150 | % of Emax | ||||
| Ultimate | 300 | % of Emax | |||||
| Protection | Type | Silicone rubber over gage | |||||
| IP rating | IP65 | ||||||
| OIML / European Approval | OIML Cert. No. | R60-2017-A-NL1-22.22 | |||||
| European Cert. No. | TC11564 | ||||||
| Class | C6 | ||||||
| nmax | 6000 | ||||||
| NTEP Approval | Cert. No. | In application process for parrellel certification | |||||
| Class | |||||||
| nmax | |||||||
| Cable | Length | 1.5 | m | ||||
| Type | 4-wire, PVC | ||||||
| Construction | Aluminum | ||||||
| Maximum platform size | 400 x 500 | mm | |||||
| Recommended torque | 14.0 | N.m | |||||
| Notes: The values for linearity, hysteresis and temp. effect on rated output are recommended values, the sum of these data meets the requirements according to OIML R60. | |||||||
